Power door locks are definitely a handy feature on today’s automobiles. However, there’s much more to a power lock than the button you press to lock or unlock the door, or the remote on your key fob. An
has to be used to move the lock both ways. This is called the door lock actuator motor (actuator for the ability to move the lock). The motor is located inside each door equipped with a power lock.
When should I replace my Door Lock Actuator Motor?
You should consider a car door lock actuator motor replacement if your door lock doesn't work and you've verified that it’s not a fuse or a wiring problem. Generally, only one motor will fail at any given time, so if the locks are working on the remaining three doors, chances are good that you need to look into a discount door lock actuator kit motor replacement for the fourth door (or opposite door
in the case of a two-door vehicle).
What happens if I don’t?
If you don’t buy a door lock actuator motor replacement, you’ll lose the benefit of having power locks. You might even lose the ability to lock the door at all, depending on how the motor failed. Obviously, keeping your vehicle secure at all times is an essential consideration, so replacing the motor as soon as possible is the wisest course of action.
How to do it: Replacing your Door Lock Actuator Motor
- Verify that the door lock actuator motor replacement you purchased is designed for your make and model.
- Disconnect the battery.
- Open the door in which the motor has failed.
- Remove the interior door panel. This is usually done with a combination of screws, bolts and plastic clips. Be gentle with the clips, because they can break easily.
- Once the door panel is removed, locate the cars door lock actuator replacement motor (it may be installed over the plastic moisture barrier, or it may be behind it.
- Disconnect the wiring harness from the failed motor.
- Remove the mounting bolts that secure the motor to the door.
- Remove the connection to the locking mechanism (this may be a metal arm, or another configuration).
- Remove the failed motor from the door.
- Connect the locking mechanism to the auto door lock actuator motor replacement.
- Mount the replacement motor in the door.
- Reconnect the wiring harness.
- Reconnect the battery.
- Test the motor
- If the motor works and the door lock operates, replace the door panel.
Anything else I need to know?
For some vehicles, you may need to remove some ancillary parts to get to the Door Lock Actuator Motor Replacement, so be prepared for that. If you run into problems with that process, you may need to do some research to get instructions that are specific to your vehicle.
Select your discounted Door Lock Actuator Motor Replacement online from Car Part Kings for fa st shipping, Live Support and great prices.